ARCHED RAISED PANELS & CROWNS Shown above is the
PANELCRAFTER 609 method of shaping arched raised panels
& crowns. For clarity, guards are not shown, but are
recommended for safety when operating machinery. With
sufficient power & the proper cutters, pre-bandsawing
is eliminated.
The X & Y
movement is made easy by means of a reverse air flow
system. With the control valve, on the left, you control
the amount of air cushion from .001 to .003, thru a
series of air jets on the bottom of the unit, eliminating
friction. Glides over miter bar slot; no need to fill.
The material is
centered with a rack & pinion connected directly to
the pinion gear with a knob, for easy, maintenance free
operation. For safety, hands are kept away from the
cutters.
COPE CUTS
Coping is fast,
easy & safe with the PC609 PANELCRAFTER. The cope bar
is attached to the base with two knob screws. Use a
blowout or backer board with the cope bar to eliminate
blowout.
RAIL CUTS
Rail cutting is
safe & easy using the PC609. Using a straight
template, or use straight edge of the #2 female template,
on a fence or ball bearing rub collar; adjust cutters to
proper depth, then clamp the material securely with the
pneumatic clamping cylinders.
WE REALIZE THE
QUALITY OF YOUR PRODUCT IS ALL-IMPORTANT. WE HAVE BUILT
THE FINEST FIXTURE AVAILABLE FOR RAPID PRODUCTION
MANUACTURING OF COMPLETE RAISED PANEL CABINET DOORS. A
COMPLETE DOOR CAN BE MADE IN MINUTES.
|